Overview
The Genie GS-1930 is a battery-powered electric scissor lift designed for indoor construction, maintenance, and stocking work. With a 19-foot platform height and 25-foot working height, it covers the vast majority of two-story ceilings, warehouse lighting, and tenant build-out applications.
Its 32-inch stowed width fits through standard 36-inch doorways and commercial elevators, and non-marking tires protect finished concrete, tile, and sealed warehouse floors. A 3-foot roll-out deck extension adds reach without re-positioning.
Global Solutions Equipment is an authorized Genie dealer. We carry new GS-1930 units in stock and certified used inventory with current ANSI inspections and a 30-day mechanical warranty.
GS-1930 Specifications
Lift Specifications
- Platform Height
- 19 ft (5.79 m)
- Working Height
- 25 ft (7.62 m)
- Stowed Height (rails up)
- 6 ft 6 in (1.98 m)
- Platform Capacity
- 500 lbs (227 kg)
- Deck Extension Capacity
- 250 lbs (113 kg)
- Occupants (indoor)
- 2 persons
Dimensions
- Stowed Length
- 6 ft 1 in (1.86 m)
- Stowed Width
- 2 ft 8 in (0.81 m)
- Wheelbase
- 4 ft 2 in (1.27 m)
- Ground Clearance
- 3.5 in (8.9 cm)
- Platform Size
- 5 ft 7 in × 2 ft 6 in
- Deck Extension
- 3 ft (0.91 m) roll-out
Weight & Power
- Weight
- 2,830 lbs (1,283 kg)
- Gross Vehicle Weight
- 3,330 lbs (1,510 kg)
- Power Source
- 24V DC (4× 6V 220Ah)
- Drive Speed (stowed)
- 2.5 mph (4 km/h)
- Drive Speed (raised)
- 0.5 mph (0.8 km/h)
- Gradeability
- 25%
Performance
- Lift Time
- 26 seconds
- Lower Time
- 30 seconds
- Turning Radius (inside)
- 0 in
- Turning Radius (outside)
- 5 ft 3 in (1.6 m)
- Tires
- Non-marking solid
- Controls
- Proportional joystick
Key Features
Indoor / Outdoor Use
Rated for indoor occupied buildings on firm level surfaces, plus light outdoor use in dry conditions.
Compact Footprint
32 in. stowed width fits standard doorways and elevators.
Onboard Diagnostics
Genie Smart Link control system with on-board diagnostic display for fast troubleshooting.
Proportional Drive
Smooth, precise control from a single joystick — easy for new operators.
Non-Marking Tires
Solid, non-marking tires safe on finished floors. No leaks, no flats.
Tilt Sensor
Automatic tilt detection cuts drive function when set on uneven ground at elevation.
Common Applications
- Warehouse lighting and electrical work to 25 ft
- Retail store fit-out, signage and ceiling tile installation
- HVAC ductwork, conduit and sprinkler service in commercial buildings
- Tenant improvement, drywall and paint work
- Hotel and hospital ceiling maintenance
- Event staging, AV install and rigging in conference centers